+49 (0) 6105 271 841 mail@minmud.com

MinDust® Dust and Splash Protection

 

… the best System – flexible, user- and maintenance friendly

MinDust Dust and Splash Protection – improve  Safety, Health and Environment and protect your Equipment

Dust emissions in mineral processing plants have a negative impact on both the equipment and the working environment. Dust causes higher wear of all machinery and equipment, increases corrosion and negatively affects SHE.

By encapsulating of dust emitting machines dust emissions can be tremendously reduced and, at the same time, the noise level will be lowered as well.

A side effect of machine encapsulation with MinDust are lower dust laden air flows and fan capacities as well as the requirement for smaller dust filter systems.

The investment into MinDust dust encapsulation will pay back within short due to less repair and maintenance and energy for fan and filter operation.

The MinDust dust encapsulation system comprises either MinWear Premium Natural Rubber 1078 or MinWear Natural Rubber 0951 sheets, which are easily attached to the machine bodies with elastic MinDust rubber clamps.

MinWear 0951 and MinWear 1078 offers

  • highest flexibility
  • simple handling and
  • highest cut and tear resistance

This assures exceptional long life times.

The MinDust system can be easily retrofitted to existing machines with no big changes on the machine structure itself. This is of particular interest at the interface between vibrating and static machine parts.

Copyright Dröwke Konstruktion und Vertrieb
Copyright Dröwke Konstruktion und Vertrieb

MinWear 1078®

Product Description

MinWear 1078 is a premium quality low modulus black natural rubber that exhibits exceptional resilience and outstanding resistance to wet small particle abrasion. MinWear 1078 is manufactured in certified facilities in accordance with the requirements of ISO 9002 and exhibits:

  • excellent resistance to wet abrasion
  • high resilience
  • good cut and tear resistance
  • resistant to UV
  • resistant to Ozone
  • resistant to a wide range of chemicals
  • excellent electrical resistance
  • good dampening properties

Product Application

MinWear 1078 exhibits exceptional field performance where it has been demonstrated to outperform and outlast Nihard, steel alloy liners and components, and polyurethane materials. The applications of MinWear 1078, where resistance to wet small particle abrasion is required, are virtually unlimited.

Typical applications include:

The lining of tanks, chutes, chute pipes, pipes, fittings, valves, pumps, spirals, underpans, hydrocyclones, hoses.

Other uses of MinWear 1078 include:

Back splatter curtains in indoor and outdoor shooting ranges, damping applications, sealing applications, etc.

Size / Availability

MinWear 1078 is available as vulcanised sheeting.

MinWear 1078 sheeting is available in lengths of 24 m up to 3 mm gauge, 20 m lengths from 4 – 8 mm and 10 m up to 25 mm gauge. Rolls are supplied 1,4 m wide in gauges from 2 mm to 25 mm. Manufactured to ISO 3302 Table 8ST2 tolerances.

Bonding Systems

One and two-compound adhesive bonding systems are available. Please consult the MinMud Technical Support Services.

Storage

Refer ISO2230 – Guide to Storage of Vulcanised Rubber.

Limitations

MinWear 1078 is not suitable for applications where it will come into contact with oils, greases and strong oxidizing agents.

tionsmitteln.

 

MinWear 0951®

Product Description

MinWear 0951 is a good quality low modulus black natural rubber that exhibits good resilience and reasonable resistance to wet small particle abrasion. MinWear 0951 is manufactured in certified facilities in accordance with the requirements of ISO 9002 and exhibits:

  • good resistance to wet abrasion
  • high resilience
  • good cut and tear resistance
  • resistant to UV
  • resistant to a wide range of chemicals
  • excellent electrical resistance
  • good dampening properties

Product Application

MinWear 0951 exhibits good field performance. Typically it is just as sealing material in MinDust dust and splash protection applications combined with MinDust grip elements.

Size / Availability

MinWear 0951 is available as vulcanised sheeting.

MinWear 0951 sheeting is available in lengths of 24 m and 2 mm gauge.

Manufactured to ISO 3302 Table 8ST2 tolerances.

Bonding Systems

One and two-compound adhesive bonding systems are available. Please consult the MinMud Technical Support Services.

Storage

Refer ISO2230 – Guide to Storage of Vulcanised Rubber.

Limitations

MinWear 0951 is not suitable for applications where it will come into contact with oils, greases and strong oxidizing agents.

Note
All quoted results are based on laboratory tests and our present state of knowledge. The data above is provided as a guide only to the product/s and its/ their use/ s. This document does not constitute a guarantee of specific properties or performance of the product/ s described or its/their suitability for a particular application. We reserve the right to alter the technical specification of products without prior notice.

 

Your Contact to MinMud

12 + 7 =

You can reach us by telephone any time between 8 am and 6 pm

+49 (0) 6105   271  841

Don’t hesitate to contact us, we will be happy to assist  you to find solutions for your application!

mail@minmud.com

 

You can reach us by telephone any time between 8 am and 6 pm

+49 6105   271  841

Don’t hesitate to contact us, we will be happy to assist  you to find solutions for your application!

mail@minmud.com

Translate »